EXPERTISE AND INSPECTIONS of steel structures

Scope of steel structure technical assessments and documentation

In steel structure technical assessments, we evaluate the condition of the facility, diagnose the causes of damage, and formulate repair conclusions, adapting the scope to the specific characteristics of the facility and the purpose of the assignment.

• Periodic inspections of steel structures and technical condition audits.
• Steel structure expert assessments with risk evaluation and repair priorities.
• Load capacity and stability analyses for current and planned loads.
• Quality control and compliance with the design, including identification of applicable standards and regulations such as Eurocodes and relevant PN-EN standards and national guidelines
• Inventory of elements and damage with photographic documentation.
• Assessment of anti-corrosion protection and the condition of protective coatings.
• Review of welded and bolted connections, with non-destructive testing where necessary.
• Recommendations for repairs, strengthening, and maintenance plans.
• Optional preparation of monitoring plans and periodic inspection programs.

The resulting documentation is clear and ready to be used in decision-making and formal procedures.

• Report from the assessment with conclusions, action scenarios, and priorities.
• Calculations and models supporting the conclusions.
• List of non-conformities and operational risks.
• Technological recommendations for repairs and strengthening.
• Materials helpful for technical acceptance procedures and administrative processes.

Carrying out expert assessments provides numerous benefits for owners and facility managers. User safety and operational continuity increase. Maintenance activities remain compliant with building regulations and properly documented. Early detection of damage helps limit the scale of repairs, and planning maintenance and renovation budgets becomes predictable. You receive clear recommendations based on data rather than intuition.

Process of performing steel structure expert assessments

We ensure reliability and efficient information flow thanks to a structured, staged approach to steel structure expert assessments.

• We start with an initial consultation to determine the objective, scope, and required input data.
• Next, we conduct a site inspection that includes visual inspection, measurements, and documentation of the condition.
• If necessary, we perform detailed testing, including non-destructive testing and material tests.
• We carry out calculation analyses, verifying load capacity, stability, and vulnerability to damage.
• We present the report and discuss results, risks, and possible courses of action.
• We offer support in implementing recommendations, including supervision, strengthening, and repairs carried out by Saskers if commissioned.

Visual inspection and measurements

During inspections and measurements we diagnose the condition of primary and secondary elements and connections.

• We visually assess nodes, welds, bolts, supports, bearings, and expansion joints.
• We identify material loss, cracks, corrosion, deformation, and displacement.
• We perform geometry and dimensional measurements and compare them with the design documentation.
• We review and assess anti-corrosion protection, areas exposed to moisture, and leakage zones.
• We inventory damage, creating photographic documentation and defect maps.
• If necessary, we perform non-destructive testing of selected connections and assess assembly quality.

Load capacity and stability analyses in steel structure assessments

In load capacity and stability assessments we carry out analyses that are crucial for decisions regarding further operation, repair, or strengthening of the structure.

• Verification of load capacity for permanent, variable, and exceptional loads in accordance with the facility’s function.
• Assessment of the impact of corrosion losses on effective cross-sections and load reserves.
• Verification of global and local stability, including susceptibility to buckling and lateral torsional buckling.
• Assessment of the load capacity of welded and bolted connections and their influence on the structural system.
• Analysis of usage scenarios after changes in function or technology.
• Recommendations for strengthening and phased execution to reduce downtime.

Quality control and compliance with the design in technical assessments

As part of steel structure technical assessments, we also verify execution quality and compliance with the design.

• Comparison of the existing condition with the design and as-built documentation.
• Verification of materials, connections, and details for compliance with guidelines.
• Identification of non-conformities, omissions, and deviations together with an assessment of their impact.
• Repair and inspection recommendations for technical acceptance procedures.
• Support in preparing acceptance protocols and checklists.

Requirements before carrying out steel structure assessments

Good preparation accelerates the work and increases the accuracy of conclusions. Before starting the assignment it is worth collecting key information and establishing access conditions.

• Design documentation, as-built documentation, and information about modifications introduced during operation should be prepared.
• Data on operational loads, technological movement, and operational incidents are required.
• The history of inspections, repairs, and maintenance is important, including reports and photographs.
• Information about planned changes in the facility’s function or loads should be provided.
• The facility’s HSE rules and requirements for work in special zones are important.
• Possible locally invasive tests must be agreed in advance if they may be required.

The conditions of cooperation and work organization are always clearly defined. The scope, schedule, and completion date are determined during contact. Access to zones and auxiliary equipment is arranged with the facility manager, and work is carried out in a way that minimizes downtime and complies with safety rules. Pricing is always individual, based on scope, requirements, and the location of the facility.

Access, documentation, and scope of testing

Technical arrangements at the start organize the entire process and reduce the risk of delays.

• The scope and depth of testing are adjusted to the objective of the assessment and the condition of the facility.
• We determine access rules for heights, confined spaces, and zones with operating installations.
• We define the list of documents required for review and the method of their transfer.
• We prepare a plan for securing zones during testing and organizing movement within the facility.
• We discuss progress reporting rules and communication channels between teams.

Consultation and quotation

We offer an initial consultation that clarifies objectives and helps select the appropriate methods. After the conversation you will receive a proposed scope of work, an indicative schedule, a list of required data, and information about the next steps. We involve facility managers in the decision-making process so that recommendations are practical and feasible to implement. If necessary, we will present different action scenarios, including phased repairs and strengthening.

Available references and completed projects confirm experience in working with steel structures in facilities with different functions. The entire process is carried out transparently, with clear technical justification of conclusions and recommendations.

Well-executed steel structure assessments provide peace of mind and a solid basis for investment decisions. It is an investment in safety, planning, and legal compliance. If you want a clear picture of the facility’s condition and a plan of action, it is worth taking this step now.

Schedule a consultation and request a quote for a steel structure assessment.